BAYANIN KAYAN KAYAN
1.Kwalaye mara amfani
Yawan aiki: 100-150BPM
Ƙayyadaddun ƙayyadaddun bayanai
1. Iyakar aikace-aikacen: Depalletizer daban-daban gwangwani na ƙarfe, kwalabe gilashi da manyan kwalabe na filastik a cikin yadudduka.
2. Tsarin tsari da abu:
(1) Kulle kai iya tsarin ɗaga jiki. Carbon karfe yi.
(2) Ɗauki madaidaicin hoto na rashin lafiya, canjin tafiya na Schneider da maɓallin, da sauransu
(3) Matsayin dandali da matakai. Carbon karfe yi.
3. aiki:
Ana sarrafa ɗaga na'ura ta Sensor na lantarki don tashi cikin yadudduka da matsayi ta atomatik. Jikin tanki yana sarrafa ido na lantarki don fita daga tanki ta atomatik. Mai aiki yana fitar da kwali na kowane Layer na tanki. Tura ƙasa kyauta abin nadi a cikin tari.
4. Ma'aunin fasaha:
(1) wutar lantarki: wutar lantarki 380V × 50 Hz × 3
Mai sarrafa wutar lantarki 220V × 50 Hz × 2
(2) girman pallet amfani: 1100mm × 1400mm
(5) Girman jiki: 6m tsayi × 3M faɗi × 3M tsayi
2. Injin Gilashin Gilashin Gilashin Gilashin
Saukewa: 4000BPH
Babban Bayani
Bangaren kurkura
1) Rotary rinser: zartar da ruwan inabi, abin sha da tsaftace ruwa.
2) Ana jigilar sabon kwalban ta hanyar rarrabuwa na rabuwa da starwheel ta hanyar matsawa da juya na'urar; Ana riƙe wuyan kwalban sama da kalmomi, bayan an wanke ruwan aseptic, wuyan kwalbar ya tashi sama da jigilar zuwa wani tsari.
3) The rinsing lamba part da kuma fitar da murfin dauko bakin karfe abu
4) Buɗe kayan aikin tuƙi
5) Kwalban da ke wurin yana sanye da ɓangaren pneumatic, sarrafa kwalban, guje wa faɗuwar kwalbar ta zo ga babban injin.
6) Bututun ruwa na rinser yana sanye da ma'aunin ma'auni da bawul mai kula da matsa lamba
7) Da hannu daidaita haɓaka don kwalban tsayi daban-daban
8) Tire mai tattara ruwa: sake sarrafa ruwan kurkure
9) Ƙarar girma ga kowane kwalban: 105ml/s (0.25MPa)
Idan babu kwalba ko tsayawa, kurkura ya tsaya; yayin da ya zo kwalba, yana sake gudu.
Cika bangare
1) Yi amfani da fasahar Jamusanci, yi amfani da ƙirar cikawar isobaric, cimma cika kwalbar da aka goge.
2) Karɓar bawul ɗin injin isobaric, cike da sauri tare da babban matakin cikawa.
3) Ɗauki sandar jagora tare da aikin rufewa; kwalabe da aka riƙe ɗagawa, yana tabbatar da cikakkiyar hatimi tsakanin wuyan kwalban da bawul ɗin cikawa, yana guje wa zubar.
4) Yi kayan aiki da na'urar rigakafin fashewa; tsabtace kwalban kwalba, guje wa botte na gaba.
5) Sanya tare da cikakken aikin tsaftacewa na CIP
6) Dangane da tsayi daban-daban, yana samun haɓaka ta atomatik kuma yana ba da kariya mai ƙarfi & ƙarancin matakin aminci.
7) Main drive rungumi dabi'ar kaya tare da bude zane: high inganci, low nocie, tsawon rai, sauki matainance, cikakken lubrication.
8) Yana ɗaukar inverter mara motsi don sarrafa babban jujjuyawar mota
9) kwalban guding tsarin, sauki tsarin, wanda zai iya canza kwalban size more sauƙi.
10) Yana ɗaukar tsarin da ke riƙe da kwalbar
11) PLC iko, tsoho za a iya jera a matsayin block, hula karanci da dai sauransu.
12) Safety proection aiki: babu kwalban, babu bawul bude, babu capping; babu hula, inji tsayayye; taga bude, inji tsayayye.
13) Sanya tare da firikwensin matakin don tabbatar da daidaiton cikawa.
14) Maɓalli mai mahimmanci da bangaren lantarki sun ɗauki samfuran da aka shigo da su.
Bangaren rubutu
1) Bangaren Cappig: an rufe hular da aka keɓe akan kwalbar da aka cika, sannan a kai shi zuwa mataki na gaba.
2) Capper yana jujjuyawa ta hanyar injin rage saurin sauri .Karfin ya bar hopper a ƙarƙashin aikin centrifugal .Fitowar an sanye shi da cap reverce dvice, lokacin da madaidaicin madaidaicin ya zo, an canza shi zuwa madaidaiciyar hanya; yawan adadin yana sarrafa ta da photoelectric canza, yana tabbatar da caping fadowa sakamako.
3) Idan kwandon yana da hula , hula na biyu ba zai iya shiga ba , wanda ke amfani da hular .
4) Kuma an sanye shi da na'urar lantarki ta hoto akan hanyar slding, lokacin da ya gwada cewa babu hula, yana tsayawa ta atomatik.
5) Capper an sanye shi da aikin ramuwa, rage yawan raguwar kwalban.
6) Idan akwai madaidaicin kambi guda ɗaya kawai a cikin kwalabe daban-daban, ƙirar capping baya buƙatar canzawa.
7) Dangane da nau'in kwalban tsayi daban-daban, ana iya daidaita capper ta atomatik.
Babban fasali:
Ingantattun layin samarwa na matakin da rarraba layin watsawa suna da alaƙa mai girma. A cikin rarraba layin watsawa dole ne a yi la'akari da shi bayan taƙaitaccen tsaye na kayan aiki (misali: alamun maye gurbin), kayan aiki a farkon ɓangaren aikin na iya yin tasiri, amma zai iya kasancewa mai kyau na kayan aiki tare, iya dukan samar line don cimma mafi girma aiki yadda ya dace. Tsarin layin samar da cikakken la'akari ga zuba jari na abokin ciniki da ingantaccen layin samarwa a cikin yin amfani da alaƙar juna gabatar da fasahohin ƙasashen waje bisa kyawawan halaye na iya biyan waɗannan buƙatu. Tsarin yana amfani da fasaha na ƙasashen waje na ci gaba, tare da matakin ci gaba na 1990s, tsarin injiniya na sabon ƙira, yawancin abubuwan da aka yi amfani da su suna amfani da tambarin lanƙwasa ko kafa tare da m mai kyau, nauyi mai nauyi, fa'idodin musanyawa. Yanayin watsawa,
aiki na abin dogara, mai sauƙi don kulawa da gyarawa, wanda ya dace da diamita na sufuri φ40 ~ φ110 mm kwalba. Tsarin kula da wutar lantarki na PLC na duk buffer shine aikin tsarin jigilar kwalba, saurin saurin aiki da haɓakawa ta atomatik, aikin buffer atomatik.
(1) M kuma abin dogara sufuri amfani da kwalabe da mainframe synchronous bel tracking iko ko downstream kayan aiki a kan-line iko, Bar kwalban a lokacin watsawa, ba ya fadi, babu katunan, babu tarewa. Dangane da buƙatun mai amfani, saitin ƙa'idodin da aka saita a gaban dandamalin buffer (yawanci a cikin mintuna 1 -2) Lokacin da aka saita injin don maye gurbin alamomin, gabanin injin ɗin ya tsaya babu buƙatar jira na wannan lokacin Cika kayan gwangwani. , An adana dandamali na buffer, lokacin da aka saita na'ura don maye gurbin lakabin Ƙarshen, za a adana saitin ƙa'idodi don amfani da dandamali mai saurin sauri a cikin kwalban Ƙarshen samarwa, sannan sake dawo da saurin aiki tare.
(2) Tsarin tsarin jigilar kayayyaki yana toshe ƙira, yana da babban canji na sassa, ƙaramin tsari, ƙaramin amo, shigarwa mai dacewa da kiyayewa, yana iya ɗaukar ta hanyar haɗuwa ya dogara da iyawa daban-daban da siffar kwalban, kuma yana da babban sassauci.
(3) Gudanar da wutar lantarki yana amfani da ci gaba da kulawa mai ma'ana wanda zai iya tsara hanyar sarrafawa kuma zaɓi abubuwan da suka dace da wutar lantarki bisa ga buƙatun ichnography na abokin ciniki don haɓaka tsayayyen isarwa.
(4) Saita matsayin canjin sarrafawa a cikin dalili bisa ga yanayin zubar da tsarin isarwa ko buƙatun abokin ciniki, sanya masu amfani dacewa don aiki.
4.Tunnel Warming Bottle
Gabaɗaya bayanin
Muna ɗaukar fasahar kayan aiki na ƙasashen waje, sabuwar ƙirar wannan injin, ta amfani da feshin ruwan zafi don haifuwa da sanyaya a hankali a yankuna biyar. Yanki na farko: yin amfani da 70 ℃ ruwan zafi sterilizing na minti 10; yanki na biyu: ta amfani da 45 ℃ sanyaya ruwa; na uku: yin amfani da sake yin amfani da ruwa daga hasumiya mai sanyi don sanyaya; na hudu: sake amfani da feshin ruwa don sanyaya; na biyar: yin amfani da ruwa mai tsafta don goge magaryar da ke kan kwalbar. Ana samar da ruwan zafi ta tsarin dumama tururi, ruwan da aka fesa a cikin ramin ruwa a gindin, sake yin amfani da famfon na fesa, idan ruwan ba zai iya kai adadin da aka saita ba, tsarin dumama zai sake dumama ruwan, kuma idan ya wuce. saitin centigrade, sannan za a kwashe da hasumiya mai sanyi, ana sake amfani da ita bayan sanyaya. Yawan zafin jiki na kwalabe shine 70 ℃, kuma ficewar zafin jiki shine 40 ℃.
Babban fasali
An yi dukkan jiki daga bakin karfe (doki, ɗaukar kaya, injin cire), ana iya saita taga kallo zuwa kusa da tushe, za'a iya buɗe babban tsari don sauƙin kiyayewa.
Sprayer ya karɓi fasahar American Spraying Systems Co.
Na'urar tacewa na sake amfani da tsarin ƙararrawa an sanye su zuwa ramin tattara ruwa a cikin rami mai sanyaya.
ABB babban motar motsa jiki, MITSUBISHI inverter
Yin lodin na'urar kariya a cikin babban injin don kare allo da tsarin jigilar kaya yadda ya kamata.
Ma'aunin zafi da sanyio da na'urar matsa lamba kuma an sanye su
Fesa famfo mai sake amfani da ruwa da famfon maganin kashe-kashe
Za a iya tarwatsa bututun fesa reshe don kurkura mai sauƙi
Yin amfani da kari na feshi iri ɗaya, a yankin farko, don hana canjin yanayin ruwa da ƙarfi.
5. Busar da kwalba
Gabatarwa
Ɗauki na'urar busawa mai ƙarfi, fitar da iska daga ƙaramin gibi, don busa ruwan da ke jikin kwalbar. An shimfiɗa rata a karkata, wanda zai iya sa dukan jiki ya taɓa iska. Ya ƙunshi babban abin hurawa, busa bututu, firam, na'urar sarrafawa, tanki mai ƙarfi da sauransu.
6. Round kwalban guda ɗaya lakabin sitika lakabin na'ura
Takaitaccen gabatarwa
Gine-gine mai nauyi yana amfani da ɓangarorin tuƙi masu girman gaske waɗanda aka haɗa tare da aluminium da firam ɗin bakin ƙarfe na tsawon shekaru masu dogaro da sabis.
Akwai tsarin ciyar da samfur daban-daban waɗanda ke ba da takamaiman tazarar samfur da daidaitawa. Ana iya amfani da shi a tsaye shi kaɗai ko haɗa cikin layi da madaidaicin saurin kayan aikin cikawa.
Babban maɗaukakin maɗaukakin maɗaukakin maɗaukakiyar ƙwaƙƙwaran matakai sun haɗa da ragi-rabo da ƙarfin bin sauri don ingantaccen aiki amintaccen aikace-aikacen kayan lakabi iri-iri.
An ƙera shi don aikace-aikacen alamun panel na gaba da/ko baya tare da ikon yin lakabin kwantena masu zagaye, murabba'i, murabba'i ko murabba'i.
7. Laser code printer
Laser ba amfani da tawada. Wannan yana nufin ƙananan farashi: babu kasafin kayan amfani da tsarin tawada don kiyayewa. Kuma babu tawada yana nufin babu rikici da tsaftataccen muhallin samarwa. Bugu da ƙari kuma na'urorin laser na iCON abin dogaro ne na gaske: wannan yana nufin babu raguwa da ƙananan cajin kulawa. Yanzu farashin ba shine dalilin rashin amfani da Laser don ƙaramar haruffa ba. Wannan lasers yana ba da babban ingancin aiki a farashi mai gasa. Su ƙanana ne kuma ƙanƙanta da sauƙi don shigarwa har ma a wurare mafi wuya. Kuma saboda lasers ne za su iya yin lamba akan samfuran a tsaye da masu motsi. Ana iya haɗa mai sarrafawa na waje idan ya cancanta.
ƙwararrun ƙwararrun ƙwararrun laser codeing waɗanda ke ba da tsabta, mai dacewa da ingantaccen madadin inkjet.
8. LYBS6545 Auto shrinking film wrapping machine
Kayan aiki taƙaitaccen gabatarwa
1. Model: LYBS6545auto film wrapping machine
LYBS 6545 auto film wrapping inji an ƙera shi kuma kerarre bisa ga sabuwar fasaha, don buƙatun buƙatun buƙatun abubuwan sha, kamar ruwa mai tsabta, ruwan ma'adinai, ruwan 'ya'yan itace, abin sha, da sauransu. Yana da nannadewa ta atomatik, tare da ramin raguwa, an cika shi da kyau.
2. Features na LYBS 6545 auto film wrapping inji
1) Tsarin rarrabuwa ta atomatik, wanda ke da jagorar raba bututun bakin karfe da farantin rarrabuwa da ke yin kwalabe a daidaitaccen abin yi don manufar rufewa, don tabbatar da cewa rukunin kwalabe na 3 x 4, 4 x 6, ko 2 x 6, 4 x 5 inji mai kwakwalwa na kwalabe a wurin don buƙatar nannade.
2) Na atomatik PE membrane sarrafa part, wanda ya ƙunshi babba da ƙananan yi-feed PE membrane tsarin a wurin da kuma sanye take da atomatik infra-red firikwensin tsarin don duba rukunin kwalabe suna shirye don nannade da yankan sealing, dukan tsari ne to. za a yi nan take ta tsarin sarrafa PLC.
Za a tura kwalaben da aka nannade zuwa cikin iskar ramin da ke raguwa ta tsarin turawa ta atomatik, wanda ke tura kwalbar da aka nannade a kan mai jigilar ramin da ke raguwa.
3) Ramin zafin iska mai zafi ta atomatik, tsarin ragewa shine sashin da aka raba na injin yana da rukunin sarrafawa daban don yanayin zafin jiki wanda ke sarrafa tsarin sarrafa zafin jiki na allon taɓawa.
4) Touch allon kula panel tare da PLC da lantarki kula da tsarin.
Lokacin aikawa: Nuwamba-30-2022